金沙手机娱乐网址,www.4066.com

欢迎光临金沙手机娱乐网址为您提供:光纤激光切割机,木工加工中心,金沙手机娱乐网址加工中心
收藏金沙手机娱乐网址在线留言进入手机站Chinese|English

金沙手机娱乐网址
INFORMATION
业内资讯
联系我们

0531-87229973

朱经理:15020002224
朱经理:15020002224
地址:山东济南市长清区文昌街道办事处郭庄南200米

业内资讯 当前位置:金沙手机娱乐网址 - 新闻中心 > 业内资讯 >

板式开料机提升工作效率的技巧都有什么?

来源:www.4066.com 时间:2020-03-13 

一个好的过程设计实际上是下一个更好的过程设计的开始,过程设计本身就是一个在实践中不断探索和改进的过程,只是更好并不是更好。
A good process design is actually the beginning of the next better process design. Process design itself is a process of continuous exploration and improvement in practice, but better is not better.
1. 渐进主义原则
1. Principle of gradualism
一个好的过程设计实际上是下一个更好的过程设计的开始,过程设计本身就是一个在实践中不断探索和改进的过程,只是更好并不是更好。
A good process design is actually the beginning of the next better process design. Process design itself is a process of continuous exploration and improvement in practice, but better is not better.
2. 同步原理
2. Synchronization principle
也就是说,板式的部分的主要方向开瓶器产品作为一个单元,和小的方向是一个包装单位的数量部分,为了控制部分实现包装过程在同一时间或更短时间差异,为了避免在包装相同的现象。它的核心内容实际上是进程表中时间项的乘积。各部件的工作时间应明确、准确、可操作,充分考虑综合因素。
That is to say, the main direction of the plate part of the bottle opener product as a unit, and the small direction is the quantity part of a packaging unit, in order to control the difference of the part of the packaging process at the same time or the shortest time, in order to avoid the same phenomenon in the packaging. Its core content is actually the product of time items in the process table. The working time of each component shall be clear, accurate and operable, and comprehensive factors shall be fully considered.
济南木工加工
3.质量方针
3. Quality policy
任何过程都不能以牺牲产品质量来提率,因为产品质量是产品的生命,以保证质量为前提,限度地实现量产。
No process can improve efficiency at the expense of product quality, because product quality is the life of the product, and mass production can be realized to the maximum extent on the premise of quality assurance.
4. 充分性原则
4. Principle of sufficiency
是板式开料机各工序避免浪费的工序本身,如:切削过程设备可以减少三个董事会同时,再次设计板两块,如钻井过程孔位置在一张板应该已经完成了两个可以,,你将会被设计成三个或四个完成,这些都使废物过程本身影响加工效率,如果你想成为个点是对应的文件将全面是切削过程也有切图,并准备订单看到道路,有钻孔工艺流程图,并根据不同类型的钻孔有不同的优化方案,同时,结合工作时间来进行。
It is the process itself of each process of the plate opening machine to avoid waste. For example, the cutting process equipment can reduce three boards of directors, and at the same time, two boards are designed again. For example, two boards should have been completed when the drilling process hole is located in one board, and you will be designed into three or four finishes, which will affect the processing efficiency of the waste process itself, If you want to be the first point, the corresponding document will be full of cutting process and cutting diagram, and prepare the order to see the road, have drilling process flow chart, and have different optimization schemes according to different types of drilling, at the same time, combined with working time.
XML 地图 | Sitemap 地图